Inclined and sloping are not uncommon for low-rise buildings. These types of roofs bring an extra dimension to the table and also create more hazardous (fall) situations.
Thus you might need a different fall protection approach when working with these types of roofs than when working on a flat roof. A steep roof is one with a slope greater than 4/12 (vertical to horizontal) according to OSHA 1926.500. There is a difference in height of more than 4 feet when stretching a length of 12 feet horizontally. In other words, the slope of the roof is 18,6 degrees or more. According to the same standards, a slope of 4/12 or less (so a slope of 18,5° or less) is referred to as a low-sloped roof. Installing a permanent fall arrest system, fall protection system or fall restraint system on a sloped roof is a good solution for purposes of its maintenance. It ensures that the maintenance personnel are safe when working on the roof. Still, the type of fall arrest system, fall protection system or fall restraint system to use will depend on situation at hand. The system can have a single anchor points or a horizontal lifeline system. There are other temporal solutions for use with a sloped roof such as a horizontal lifeline system and these are removed when the task is finished. These systems usually come in pre-assembled sets or the fact that you can assemble the units at the work site. There are various designs and models of fall arrest systems and fall protection systems for sloped roofs. The type to select with regard to design and styles would vary according to the floor requirements. You can contact the professionals to understand the kind of roof protection system and the design that would be more suitable. You may also be able to get designs and models that do not penetrate the roof's membrane. For instance, some systems feature pre-fabricated modular panels that eliminate the need for drilling, welding or threading into the roof. An example is a system with ready-made pipe railings that attach together with allen wrench and torque wrench to secure them into place along the edges of the roof. The pipe railings are then connected to the rubber-padded bases with same tools to anchor the system in place. This allows for permanent and temporary use. Another type is a multi-level sloped roof protection system for multi-level sloped roof protection. You can also use the keyguard sloped roof railing that protects the roof's point of entry. A system can prevent falls, which mostly happen at a sloped roof's point of entry. The roof fall protection systems can be used for safer access on and off of the roof. There are also optional, self-closing safety gates that protect workers when working near the roof's entry and exit locations. Other types of protection systems to choose from include all-encompassing or pre-designated sloped roof railings. The most important thing is to ensure they comply with the OSHA standards.
0 Comments
Leave a Reply. |
|